Announcement

Collapse
No announcement yet.

Misfiring and all lights blinking

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    Originally posted by Fredrik73 View Post
    When I look for cop's on the net there are from 60$/8psc to1280$/8pcs
    its very tempting to take some sheaper.......
    I see no reason to use the EOM coils. If the EOM coils were any good we wouldn't be replacing so many of them.
    sigpic

    Comment


    • #17
      IMHO
      Even the Ford coils are now made in China, so who really knows what you are getting and there are certainly bargain coils out there and they all seem to be made in China. So whats the difference if any and no way to prove if one is better than another ANYWAY.

      Comment


      • #18
        All you can do is put your money down and take your chances.

        Comment


        • #19
          Originally posted by valkyrie View Post
          sounds like it could be a fem causing the lighting issue.
          oh im so afraid of that problem
          but the problem seems to be everywhere not in just one fuse/reley box so i suspect the fem too
          ordered a wiring diagram book yesterday hope that helps me alitle
          Fredrik
          I Started out with nothing and I still got most of it left

          Comment


          • #20
            Originally posted by Dennis45 View Post

            Hi Fredrik,

            here red is a link to an old section on Ignition on our birds. It's old info but very informative non the less.

            Good Luck with your Hobby Horse.......


            http://www.thunderbirdnest.com/forum...ech-forums/cop

            I have heard good good reviews of the Denso coils and NGK spark plugs.

            https://www.ebay.ca/itm/8-pc-Denso-I...iA&vxp=mtr
            Thank you for the links
            very good to see because thats more a price for my wallet
            was today and talked to a jaguar expert he had used coils for jaguar xj-s v8 must see if it realy is the same
            I Started out with nothing and I still got most of it left

            Comment


            • #21
              Originally posted by carntz View Post
              IMHO
              Even the Ford coils are now made in China, so who really knows what you are getting and there are certainly bargain coils out there and they all seem to be made in China. So whats the difference if any and no way to prove if one is better than another ANYWAY.
              yes Thank you if i have to buy 8new i will try the sheaper ones
              and write about it here on the forum how it worked (good i hope) :-)
              i will know more tonight because im on my way out in the garage now to see what i can do
              /Fredrik
              I Started out with nothing and I still got most of it left

              Comment


              • #22
                IMG_1459.jpg
                some funny person has trying to repair my car before me.....
                all connections to the ignition coils are broken and glued in place
                sparkpluggs looks like they are from 2002
                will start with new sparkpluggs

                IMG_1455.jpgIMG_1460.jpg
                Attached Files
                I Started out with nothing and I still got most of it left

                Comment


                • #23
                  can some one please tell me what this thing do or what its called?

                  IMG_1463.JPG
                  I Started out with nothing and I still got most of it left

                  Comment


                  • #24
                    IMHO, i think you are just compounding your problems by only replacing the plugs. I highly recommend replacing the spring connectors, boots, and COPs ( even with the cheaper ones). Also use electrical dialectic grease on connections. My lesson learned is never go back with old parts where possible, when they come off, they stay off!

                    Comment


                    • #25
                      Originally posted by BillyL View Post
                      IMHO, i think you are just compounding your problems by only replacing the plugs. I highly recommend replacing the spring connectors, boots, and COPs ( even with the cheaper ones). Also use electrical dialectic grease on connections. My lesson learned is never go back with old parts where possible, when they come off, they stay off!
                      Hi Billy
                      yes that sounds like a good idea i must buy it new, to get rid of some of my problems
                      /Fredrik
                      I Started out with nothing and I still got most of it left

                      Comment


                      • #26
                        Today i tok out the FEM just to look at the connections and serketcard, looked fine but it was not a easy job to get it out
                        found those cards inside the door egen i deassembled the intorior
                        starting to understand why i have problems....
                        15483649510882083252918.jpg
                        I Started out with nothing and I still got most of it left

                        Comment


                        • #27
                          That phone number is from Los Angeles, California. I wouldn’t be too concerned. Many possible reasons for it being there. I have faith that you will get it running right.

                          Comment


                          • #28
                            Originally posted by 007Cruiser View Post
                            That phone number is from Los Angeles, California. I wouldn’t be too concerned. Many possible reasons for it being there. I have faith that you will get it running right.
                            Thank you Gene
                            today i Will by New sparkplugs and see if There are sparks on all cylinders
                            I Started out with nothing and I still got most of it left

                            Comment


                            • #29
                              Originally posted by Fredrik73 View Post
                              can some one please tell me what this thing do or what its called?

                              IMG_1463.JPG
                              Fredrik,

                              I tried to find out what year your Tbird was. I assume it is a 2002 from the spark plug remark in post #22.
                              HKS
                              2002 TB Motor Trend COTY Blue/White/Full #24737 (One of 291)
                              2021 Explorer XLT Sport 2.3L 300HP/310FP color RollingThunder
                              2015 Passat SE TDI 150HP/236FP (40MpgCity47MpgHW) 720MR
                              26Mpg in traffic jam. Skill required to get 40+mpg in town.

                              Comment


                              • #30
                                Originally posted by HKS View Post

                                Fredrik,

                                I tried to find out what year your Tbird was. I assume it is a 2002 from the spark plug remark in post #22.
                                HKS
                                In his profile it says he has a 2002.
                                T-Birding it's the only way to fly!
                                Richard & Gordon

                                Comment

                                Working...
                                X