Wixom plant.

[BacktotheFuturePete]

You may have seen this but it is cool to watch. They make it look easy.http://michiganhistory.leadr.msu.edu...H6n-jKjoN1A0CM

[HKS]

You may have seen this but it is cool to watch. They make it look easy.http://michiganhistory.leadr.msu.edu...H6n-jKjoN1A0CM

Wow,
This was probably the plant that made the Lincoln with suicide doors used by Kennedy at the time of the assassination.

[4LOWBIRDS+7]

Wow,
This was probably the plant that made the Lincoln with suicide doors used by Kennedy at the time of the assassination.

It sure was. I spent many days at that plant between 1981 and 1989.

[Gobird]

UOTE=4LOWBIRDS+8;n1068294]

It sure was. I spent many days at that plant between 1981 and 1989.[/QUOTE]

Then you were there when they built at least my 84, 87, 89, 90 and maybe my 91 T-Birds . The 90 was a big problem with a water leak. Can I blame that on you.

[4LOWBIRDS+7]

Then you were there when they built at least my 84, 87, 89 and maybe my 90 and 91 T-Birds . The 89 was a big problem with a water leak.

Thunderbird production left Wixom after 1977 and did not come back until 2002. Your Thunderbirds were built in Lorain and yes there was a major water problem on the right side cowl area. Solved that problem during 1990 production. TSB told dealers how to prevent leak by creating a dam around the fresh air intake.

[Gobird]

.

Thunderbird production left Wixom after 1977 and did not come back until 2002. Your Thunderbirds were built in Lorain and yes there was a major water problem on the right side cowl area. Solved that problem during 1990 production. TSB told dealers how to prevent leak by creating a dam around the fresh air intake.

Guess my dealer never got the memo. They did give me a good deal on a tread in for a 1991.

[007Cruiser]

Wow,
This was probably the plant that made the Lincoln with suicide doors used by Kennedy at the time of the assassination.

His was built with homicide doors.

[Smedley]

I also spent many hours at the wixom plant during my tenure with Ford Manufacturing. My wife bought me the coffee table book about the development of the 2002+ for xmas, it was great to see all the CAD files of the components that I helped design and produce in the book. Happy new year.

[Quickdraw]

I also spent many hours at the wixom plant during my tenure with Ford Manufacturing. My wife bought me the coffee table book about the development of the 2002+ for xmas, it was great to see all the CAD files of the components that I helped design and produce in the book. Happy new year.

Were you doing those CAD drawings in PDGS?

[Smedley]

Yup - Originally PDGS, but not for the M205, (thunderbird) mostly in IDEAS, now its all CATIA