Re: Luggage Rack: The Install
More Open Trunk
Strap hooks
Note excess in both shots (makes the actual tightener be above the trunk lid, versus below it, out of sight
Full Shot
And a Frontal Shot
One note: the Lid is quite heaveier now!!
Closeups below
Announcement
Collapse
No announcement yet.
Luggage Rack: The Install
Collapse
X
-
Re: Luggage Rack: The Install
And from the rear.
Hold on Dot, I'll move her back out and open the lid.
Be right back........again
Okay.
Open from the Right
Open from the Left
More belowLast edited by Ol'Dave; Feb 14, 2009, 02:09 PM.
Leave a comment:
-
Re: Luggage Rack: The Install
Finished product:
An Angle View
Left side shot
Right Side Shot
Leave a comment:
-
Re: Luggage Rack: The Install
The Clamps
First one Front Clamp. Tight Fit, But clears no problem
Second: Rear Clamp. Plenty of clearance
Third. The Safty Sress Straps. They are long, so I did have a slight problem shortening them up to fit as the instructions state. Might fit better if use second bar, versus the first one as indicated in the instructiions.
Leave a comment:
-
Re: Luggage Rack: The Install
Couple more ange shots of fitment and overall look.
I Test fitted the clamps. There is plenty of clearance for them from the fender edges. The part that actually clamps to the trunk lid are padded.
With the Rack aligned properly (See Paper Test), the Thrid Brake Ligt is clearly visable, from rear of car.
Now to go and clamp it down. I will add the "Stress Load" Straps, so you can see them installed. Really easy, just hook the padded clamps to the front edge of the rack, and secure the straps to the first bar. That now gives the rack 6 holding spots to handle heavy loads.
Now to go do it: I'll be be shortly......................
Leave a comment:
-
Re: Luggage Rack: The Install
Now a test fit
Perfect fit.
Note from posts are only 1/8" from the edge
The rear ones set in at 3/8"Last edited by Ol'Dave; Feb 14, 2009, 11:48 AM.
Leave a comment:
-
Re: Luggage Rack: The Install
Now the instructions and fitment:
Click on Instruct's, should be readable.
Shot of one of the footing's on the rack itself
The Paper Test, for alignment
Leave a comment:
-
Luggage Rack: The Install
Well, here we go.
First: the unpackageing:
Second: Unwrapping to check it all out (Note the neat Luggage Tag & Hat!)
Third: With the rack upsidedown (Note the padding on the clamps)Last edited by Ol'Dave; Feb 14, 2009, 11:45 AM.Tags: None
Leave a comment: